High Power SPEC Pak® - up to 240 Amps

  • Environmentally Sealed Against Water & Dust Ingress
  • Highly Configurable
  • Up to 8 Auxilliary Contacts

Literature

Specifications

Literature Request Form


 

High Power SPEC Pak® Shell / Components        
         
ELECTRICAL        
UL Voltage Rating (AC/DC) 600      
         
Dielectric Withstanding Voltage (AC) 3000      
         
Operating Temperature¹        
(˚C) -40˚ to 105˚      
(˚F) -40˚ to 221˚      
         
Flammability Rating of SPEC Pak® Shells UL94 V-0      
         
UV Rating (Equivalent) UL746C F1      
         
MECHANICAL        
Shell / Latch Mating Cycles 1,500 Min.      
         
Average Connect/Disconnect        
(lbf) 28      
(N) 125      
         
IP Rating IP68      
         
IL50E Sealing Requirement Pass      
         
Crush Test per EIA-364-40B Pass      
         
Drop Test per UL50E Pass      
         
MATERIAL        
SPEC Pak® - Receptacle, Plug & Holders PBT      
         
Latch Stainless Steel      
         
Latch Retainer Stainless Steel      
         
Holder Mount Hardware Nickel Plated Steel      
         
         
  POWERPOLE® CONTACTS
  PP180 PP120 PP75 PowerMod®
         
ELECTRICAL        
UL Current Rating (Amperes)⁽²⁾ 260 190 70 5
         
CSA (30˚C Rise) (Amperes)⁽²⁾ 140 100 40 5
         
Voltage Rating (AC/DC) 600 600 600 600
         
Contact Barrel Wire Size         
(AWG) 3/0 to 6 1/0 to 6 6 to 12 12 to 24 
(mm²) 85 to 13.3 53.5 to 13.3 13.3 to 3.3 4.0 to 0.25
         
Average Contact Resistance (milliohm) 0.10 0.14 0.20 3.00
         
Contact Retention Force        
(lbf) 170 100 50 8
(N) 756 445 222 36
         
Operating Temperature⁽¹⁾        
(˚C) -20˚ to 105˚ -20˚ to 105˚ -20˚ to 105˚ -20˚ to 105˚
(˚F) -4˚ to 221˚ -4˚ to 221˚ -4 to 221˚ -4 to 221˚
         
Flammability Rating UL94 V-0 UL94 V-0 UL94 V-0 UL94 V-0
         
Contact Materials Copper Copper Copper Copper Alloy
         
Contact Plating Silver Silver Silver Gold over Nickel
         
MECHANICAL        
Mating Cycles (no load)⁽³⁾ 10,000 10,000 10,000 10,000
         
Average Connect / Disconnect (lbf) 20 8 5 (Low Detent) 10oz. (3N) Average
  - - 7 (High Detent) -
         
MATERIAL        
Powerpole® Housing Material Polycarbonate Polycarbonate Polycarbonate PBT


NOTE:
(1) -40° to 105° C (-40° to 221° F) can be achieved by using APP Chemical Resistant 
      Powerpole® housing. Contact factory for more information.
(2) Based on Panel Mount Receptacle to Plug configuration.
(3) Based on silver plated contacts.

         

For further industry tests and/or agency approvals, contact customer service.

 

 

Drawings

3D Download Files

Literature Request Form

Housing

SK1-A95H02, SK1-B95H02, High Power SPEC Pak (2xPP180) Inline Receptacle Housing

SK1-A95H03, SK1-B95H03, High Power SPEC Pak (3xPP120) Inline Receptacle Housing

SK1-A95H06, SK1-B95H06, High Power SPEC Pak (6xPP75) Inline Receptacle Housing

SK2-095H02, High Power SPEC Pak (2xPP180) Panel Mount Receptacle Housing

SK2-095H03, High Power SPEC Pak (3xPP120) Panel Mount Receptacle Housing

SK2-095H06, High Power SPEC Pak (6xPP75) Panel Mount Receptacle Housing

SK6-A95H02, SK6-B95H02, High Power SPEC Pak (2xPP180) Plug Housing

SK6-A95H03, SK6-B95H03, High Power SPEC Pak (3xPP120) Plug Housing

SK6-A95H06, SK6-B95H06, High Power SPEC Pak (6xPP76) Plug Housing

1381 Series, PP180 Housing

1321 Series, PP120 Housing

5916 Series, PP75 Housing

5927 Series, PP75 Ground Housing

Contacts

Power Contacts, PP180

1328G1/G2, 2/0-3/0 awg Loose Piece Contact for PP180

1347,1382,1383 & 1384 1 awg, 1/0 Loose Piece Contact for PP180

1348, 6awg Loose Piece Contact for PP180- Thin Wall

Power Contacts, PP120

1323 Series, 1-1/0 awg Low Detent Loose Piece Contact for PP120

1319 Series, 2-6 awg High Detent Loose Piece Contact for PP120

6811 Series, 2-6 awg Low Detent Loose Piece Contact for PP120

Power Contacts, PP75

1307, 6 awg Low Detent Loose Piece Contact for PP75

5900, 6 awg High Detent Loose Piece Contact for PP75

5915, 10-12 awg High Detent Loose Piece Contact for PP75

5953, 10-12 awg Low Detent Loose Piece Contact for PP75

5952, 10mm² (Flared) Loose Piece High Detent Contact for PP75

Ground Contacts, PP75

1875G Series, PP75 Ground Contact

Auxiliary Contacts

PM16P Series, 12-24 awg PowerMod Crimp Pins

PM16S Series, 12-24 awg PowerMod Crimp Sockets

Sealing Glands

PG36 Plastic Single & Multi-hole Cable Gland

PG42 Plastic Single & Multi-hole Cable Gland

Accessories

SK9-095, High Power SPEC Pak Receptacle Cover

SK9P-095, High Power SPEC Pak Plug Cover

1399 Series, PP75 Long Spacer

1399 Series, PP75 Short Spacer

114411 Series, Strain Relief Grommet for PP75

Instructions & Tooling

Literature Request Form

Assembly Instructions

High Power SPEC Pak Inline Receptacle Assembly Instructions for 2,3 & 6 Position

High Power SPEC Pak Panel Mount Receptacle Assembly Instructions for 2,3 & 6 Position

High Power SPEC Pak Plug Assembly Instructions for 2,3 & 6 Position

Powerpole Assembly Instructions

PowerMod Contact Assembly Instructions

PowerMod Contact Insertion Inspection Tool Assembly Instructions

PPMX Connector for SPEC Pak Assembly Instructions

Tools

Powerpole® 180 (PP180)
Wire Size Loose Piece Part Numbers   Loose Piece Contact Crimp Tools
AWG mm² Tin Plating Silver Plating   Hand Tool OR Pneumatic Bench Tool + Die + Locator Number of Crimps
   
PP180 Loose Piece Flat Wiping Power 
3/0 85

 

N/A

1328G2  

 

1368

Series

 

 

1387G2

  1303G12  

 

1304G32

 

Double

2/0 53.5 1328G1
1/0 53.5 1382 1303G13
#1 42.4 1347
#2 33.6 1383
#4 21.1 1384
#6 13.3 1348 1387G1 1388G4 1389G3 Single

Powerpole® 120 (PP120)
Wire Size Loose Piece Part Numbers   Loose Piece Contact Crimp Tools
AWG mm² Tin Plating Silver Plating   Hand Tool OR Pneumatic Bench Tool + Die + Locator Number of Crimps
                         
PP120 Loose Piece Flat Wiping Power 
1/0 53.5

 

N/A

1323G2  

          

 1368  Series

 

 

1387G1

  1388G3  

 

1389G4

 

Single

#1 42.4 1323G1
#2 33.6 1319 1388G4
#4 21.2 1319G4
#6 13.3 1319G6

Powerpole® 75 (PP75)
Wire Size Loose Piece Part Numbers   Loose Piece Contact Crimp Tools
AWG mm² Tin Plating Silver Plating   Hand Tool OR Pneumatic Bench Tool + Die + Locator Number of Crimps
                         
PP75 Loose Piece Flat Wiping Power 
#6 13.3

 

N/A

1307  

 

1309G4

 

 

1387G1

  1388G6  

 

1389G6

 

Single

5900
#8 8.4 5952
#10 / 12 5.3 / 3.3 5953 1388G7
5915



1309 Series, Hand Crimp Tool Operating Instructions

1368 Hydraulic Crimp Tool Crimp Instructions

1367G1, Pneumatic Crimp Tool

1387G1 & 1387G2, Pneumatic Crimp Tool

PM1000G1, 4 Indent Crimp Tool Instructions

PM1002G1, PowerMod Contact Insertion Tool

PM1003G1, PowerMod Contact Extraction Tool

PM1003GX, PowerMod Contact Insertion Inspection Tool

TM0001 (MIL-DTL-225201), Hand Crimp Tool

TP0001, Pneumatic Crimp Tool

Crimp Specification for PP180 Contacts

Crimp Specification for PP120 Contacts

Crimp Specification for PP75 Contacts

Crimp Specification for PowerMod Contacts

Reference

Application Tooling Page

Wire Gauge Conversion Chart from AWG to MM²

best live chat