Mid Power SPEC Pak® - up to 80 Amps

  • Compact & Configurable
  • Power, Ground & up to 8 Auxiliary Contacts
  • Environmentally Sealed

Literature

Specifications

Literature Request Form


 

SPEC Pak® Shells Used With
  SPEC Pak® Shell Powerpole ® Power Contacts & Housings Auxillary Contacts⁽¹⁾ (Powermod® Series)
       
ELECTRICAL      
Current Rating (Amperes)      
UL 1977 - 80⁽²⁾ 5
CSA (30˚C Rise) - 50⁽²⁾ 5
       
Voltage Rating      
UL 1977 (AC/DC) - 600 600
       
Dielectric Withstanding (AC) - 3,000 -
       
Contact Resistance Milliohms (Average) - 0.200⁽³⁾ 2.000⁽⁴⁾
       
Hot Plug Amp Rating (UL 1977)      
250 Cycles @ 120V - 50⁽⁵⁾ -
       
MECHANICAL      
Environmental Seal      
IP Rating IP68 - -
Submersion (UL 50E) Pass - -
       
Wire Size - 12 to 6 AWG 24 to 12 AWG
  - 3.3 to 13.3 mm² 0.50 to 2.5 mm²
       
Operating Temperature      
(˚C) -40˚ to 105˚ -20˚ to 105˚ -40˚ to 105˚
(˚F) -40˚ to 221˚ -4˚ to 221˚ -40˚ to 221˚
       
Mating Cycles (no load)      
Silver Plated Contacts - 1,500 -
Gold Plated Contacts - - 1,500
       
Contact Retention Force - > 50 lbf / 222 N -
       
Insertion Force - 28 lbf -
       
Touch Safe (IEC 60529) - IP10 -
       
Drop Test Pass - -
       
Panel Break Off (EIA 394-97) Pass - -
       
Crush Test (EIA 364-40B) Pass - -
       
MATERIALS      
Shell / Housing PC/PBT PC PC/PBT
       
Powerpole® Holder PC/PBT - -
       
Latch Stainless Steel - -
       
Flammability (UL 94) V0 V0 V0
       
Weatherability (UL 764C) F1 F1 F1
       
Contacts      
Base - Copper Alloy Copper Alloy
Plating - Silver Gold over Nickel


NOTES:
1. Integral signal holders that hold up to 8 pins and 8 sockets.
2. Based on 6 AWG.
3. Based on 6 AWG 1-1/4" distance between probes.
4. Based on 20 AWG.
5. Hot Plug testing completed using individual Powerpole® housings and contacts, not installed 
     in SPEC Pak® shells.

         

For other industry tests and/or agency approvals, contact customer service.

 

Drawings

Instructions & Tooling

Performance Charts