Wire to Panel

• 

  Powerpole® PP180 Silver Plated Wire Contacts

  Powerpole® PP180 Silver Plated Wire Contacts, 1/0 AWG, High Mating Force Also found in: /Powerpole® 180/SB 175

  SKU: 1382-BK

  Compare

  You've reached the 5 product limit. Remove a product to proceed.
• 

  Powerpole® 15-45 Standard Housings White

  This original housing design has an open interface and is available in a wide array of colors. Will not mate with finger proof housings. White

  SKU: 1327G7

  Compare

  You've reached the 5 product limit. Remove a product to proceed.
• 

  Powerpole® 15-45 Standard Housings White

  This original housing design has an open interface and is available in a wide array of colors. Will not mate with finger proof housings. White

  SKU: 1327G7-BK

  Compare

  You've reached the 5 product limit. Remove a product to proceed.
• 

  Powerpole® 15-45 Finger Proof Housings White

  Improved on the original APP design by adding ribs to mating interface to protect against accidental contact with live circuits. Meets the requirementsof UL1977 section 10.2 and is rated IP20. Will not mate with standard housings. White

  SKU: 1327G7FP

  Compare

  You've reached the 5 product limit. Remove a product to proceed.
• 

  Powerpole® 75 Mounting Clamp 3 or 6 Pole

  Mounting Clamp 3 or 6 Pole

  SKU: 1463G2

  Compare

  You've reached the 5 product limit. Remove a product to proceed.
• 

  Powerpole® 120 Mounting Clamp 2 or 4 pole

  Powerpole® 120 mounting clamps can be used for fastening a block of Powerpole® 120 series housings to a panel. Connector blocks must be a complete square for the clamps to work properly. Fastening hardware not included.

  SKU: 1464G1

  Compare

  You've reached the 5 product limit. Remove a product to proceed.
• 

  Powerpole® 120 Mounting Clamp

  Powerpole® 120 Mounting Clamp, 2- pole

  SKU: 1464G2

  Compare

  You've reached the 5 product limit. Remove a product to proceed.
• 

  Powerpole® 180 Mounting Clamp 2 pole

  Mounting clamps can be used for fastening a block of Powerpole® 180 series housings to a panel. Connector blocks must be a complete square for the clamps to work properly. Fastening hardware not included.

  SKU: 1465G1

  Compare

  You've reached the 5 product limit. Remove a product to proceed.
• 

  Powerpole® 180 Mounting Clamp 3 pole

  Mounting clamps can be used for fastening a block of Powerpole® 180 series housings to a panel. Connector blocks must be a complete square for the clamps to work properly. Fastening hardware not included.

  SKU: 1465G2

  Compare

  You've reached the 5 product limit. Remove a product to proceed.
• 

  Powerpole® Pak Snap in Receptacle 2-4 Poles

  Mate to plug shells with or without latches, or mate to another panel mount receptacle to create a bulkhead to bulkhead connection. For use with Powerpole® wire or PCB connectors. Order the number of retaining pins for each receptacle as shown below s

  SKU: 1470G1

  Compare

  You've reached the 5 product limit. Remove a product to proceed.
• 

  Powerpole® Pak Snap in Receptacle 2-4 Poles

  Mate to plug shells with or without latches, or mate to another panel mount receptacle to create a bulkhead to bulkhead connection. For use with Powerpole® wire or PCB connectors. Order the number of retaining pins for each receptacle as shown below s

  SKU: 1470G1-BK

  Compare

  You've reached the 5 product limit. Remove a product to proceed.
• 

  Powerpole® Pak Snap in Receptacle 5 to 6 Poles

  Mate to plug shells with or without latches, or mate to another panel mount receptacle to create a bulkhead to bulkhead connection. For use with Powerpole® wire or PCB connectors. Order the number of retaining pins for each receptacle as shown below s

  SKU: 1470G2

  Compare

  You've reached the 5 product limit. Remove a product to proceed.
• 

  Powerpole® Pak Snap in Receptacle 5 to 6 Poles

  Mate to plug shells with or without latches, or mate to another panel mount receptacle to create a bulkhead to bulkhead connection. For use with Powerpole® wire or PCB connectors. Order the number of retaining pins for each receptacle as shown below s

  SKU: 1470G2-BK

  Compare

  You've reached the 5 product limit. Remove a product to proceed.
• 

  Powerpole® Pak Snap in Receptacle 7 to 8 Poles

  Mate to plug shells with or without latches, or mate to another panel mount receptacle to create a bulkhead to bulkhead connection. For use with Powerpole® wire or PCB connectors. Order the number of retaining pins for each receptacle as shown below s

  SKU: 1470G3

  Compare

  You've reached the 5 product limit. Remove a product to proceed.
• 

  Powerpole® Pak Snap in Receptacle 7 to 8 Poles

  Mate to plug shells with or without latches, or mate to another panel mount receptacle to create a bulkhead to bulkhead connection. For use with Powerpole® wire or PCB connectors. Order the number of retaining pins for each receptacle as shown below s

  SKU: 1470G3-BK

  Compare

  You've reached the 5 product limit. Remove a product to proceed.
• 

  Powerpole® Pak Snap in Receptacle 9 to 10 Poles

  Mate to plug shells with or without latches, or mate to another panel mount receptacle to create a bulkhead to bulkhead connection. For use with Powerpole® wire or PCB connectors. Order the number of retaining pins for each receptacle as shown below s

  SKU: 1470g4

  Compare

  You've reached the 5 product limit. Remove a product to proceed.
• 

  Powerpole® 15/45 Mounting Clamp 4 or 8pole

  Powerpole® 15/45 Mounting Clamp 4 or 8 pole- Set of 2 Clamps

  SKU: 1462G3

  Compare

  You've reached the 5 product limit. Remove a product to proceed.
• 

  Powerpole® 75 Mounting Clamp 2 or 4 Pole

  Mounting Clamp 2 or 4 Pole

  SKU: 1463G1

  Compare

  You've reached the 5 product limit. Remove a product to proceed.