SBE® SBO® SBX® Connector Series
SBE® and SBX® connectors build on the capability of the SB® connectors that handle two primary power contacts with the capacity to have up to 8 auxiliary power / signal contacts. The centers of the connector housing's feature a location for either: two PP15-45 housings and contacts, an innovative 1x4 auxiliary accessory, or two PPMX housings that can accommodate up to 8 aux contacts. In addition, the housings meet IEC 60950 & IEC60529 touch safe requirements.
Sequencing within auxiliary positions is possible using the 4 pin lengths available in the 1x4 auxiliary accessory however the auxiliary contacts mate last / un-mate first in relationship to the power contacts. While SBE® and SBX® housings offer similar capabilities, the SBE® connector housings are molded from a chemical resistant PBT/PC blend resin allowing them to meet EN1175-1 requirement and are tested to EN1175-1 standards. SBX® are molded from a rugged PC resin that is more impact resistant and are tested to UL/CSA requirements.
FEATURES
SBE® SBO® SBX®
- Available in three sizes: SBO®60/SBE®80, SBE®160/SBX®175, and SBE®320/SBX®350
- Silver Plated Wire Contacts for Wires up to 350 mcm (185 mm²)
Allows low resistance enabling UL rated currents up to 550 amps per pole - Up to 8 Last-mate / First-break Auxiliaries
Enables intelligent power switching, CAN and interlock loop circuitry, as well as power up to 20 amps per pole - Durable Housings and Contacts
Like all Multipole connectors, the silver plated power contacts and plastic housings are rated up to 10,000 mating cycles - Touch Safe Interfaces
Minimizes potential contact with live circuits per IEC 60950 & IEC 60529 - Color-coded Mechanical Voltage Keys
Like all Multipole connectors, the SBE®,SBO®, and SBX® offer an easy way to identify circuits and protect against cross mating
- Technical Info
- Drawings
- 3D Files
Parallel Charging Technical Paper
Assembly instruction for SBE160, SBE320, SBX175 and SBX350 Series
Assembly instructions for 1X4 Housing Connector
PPMX Connector For SBE80 / SBO 60 Assembly Instructions
Crimp Specification for SBO 60 SBE 80 Contacts
Crimp Specification for SBX 175 SBE 160 Contacts
Crimp Specification for SBX 350 SBE 320 Contacts
111038S2 - Insertion / Extraction Tool PP15/45
969P1 - SBE160/SBE175 Extraction Tool
970P1 - SBE320/SBX350 Extraction Tool
PM1000G1 - Operating Instructions 4 Indent Crimp Tool
PM1002G1 - PowerMod Contact Insertion Tool
PM1003G1 - Extraction Tool for PowerMod & SBS75X
SBE 80/SBO60 HOUSING AND SPRING ASSEMBLY OUTLINE DRAWING
SBE160 Housing and Spring Assembly Outline Drawing
SBE 320 HOUSING AND SPRING ASSEMBLY OUTLINE DRAWING
SBX175 Housing and Spring Assembly Drawing
SBX350 Housing and Spring Assembly Drawing
SBE 160/SBX 175 CONTACT FOR 35MM WIRE
Please select the 3D download tab on the following page: