Wire to Panel
-
Powerpole® 15-45 PCB Mounting Staples 1×1 Short 7mm
PCB staples are soldered into place to secure Powerpole® 15-45 series housingsin a horizontal configuration to the board. Reduce strain on soldering joints duringmating and unmating.SKU: 114555P1 -
Powerpole® 75 Strain Relief Grommets #12/10 AWG
Powerpole® 75 Strain Relief Grommet 12-10 AwgSKU: 114411P3 -
-
-
Powerpole® 180 Retaining Pins
Retaining pins are used to keep stacked Powerpole® 180 series housings from separating. Retaining pins are inserted in the circular opening between two housings stacked side by side. Dimension ôBö is +/- .015 in or .38 mm. 2 Block HighSKU: 111812P8 -
Powerpole® 75/120 Retaining Pins 1 Block High
Powerpole® 75/120/15/45 Retaining Pin 1 Block High Also found in: /Powerpole® 120/Powerpole® 15-45/Powerpole® 75SKU: 111812P7 -
Powerpole® 75 Retaining Pins 2 Block High
Powerpole® 75/180/45/15 Retaining Pin 2 Block High Also found in: /Powerpole® 15-45/Powerpole® 180/Powerpole® 75SKU: 111812P6 -
Powerpole® 15-45 Retaining Pins 2 Block High 11.18mm
Keep stacked Powerpole® 15-45 series housings from separating. Retaining pins are inserted in the circular opening between two housings stacked side by side. 2 Block HighSKU: 111812P5 -
Powerpole® Retaining Pin- .094 x 1.125
Keep stacked Powerpole® 15-45 series housings from separating. Retaining pins are inserted in the circular opening between two housings stacked side by side. 2 Block HighSKU: 111812P16 -
Powerpole® Pak Retaining Pin
Powerpole® Pak Retaining Pin for Snap-in Receptacle PowerSKU: 110g9-bk -
-
-
Powerpole® 15-45 Blindmate Pak Connector Hardware Bag Receptacle Side
Ideal for panel to panel, bulkhead to bulkhead, or rack mount applications that require the power connector to compensate for up to 0.45 in. [11.43 mm] of misalignment in either axis.Eight positions can be filled with Powerpole® 10-45 connectors. The recepSKU: 110G51 -
Powerpole® Pak Hardware Bag for Blindmate Plug with Pins
Ideal for panel to panel, bulkhead to bulkhead, or rack mount applications that require the power connector to compensate for up to 0.45 in. [11.43 mm] of misalignment in either axis.Eight positions can be filled with Powerpole® 10-45 connectors. The recepSKU: 110g50 -
Powerpole® 120/Powerpole® 180 Retaining Pins 2 Block High
Powerpole® 120/Powerpole® 180 Retaining Pins 2 Block High Also found in: /Powerpole® 120/Powerpole® 180SKU: 110G20 -
Powerpole® 75/180 Retaining Pins 1 Block High
Powerpole® 75/180 Retaining Pin 1 Block High Also found in: /Powerpole® 120/Powerpole® 75SKU: 110G19