Our Products

Powerpole

• 

  Powerpole® PP180 Silver Plated Wire Contacts, 4 AWG

  Powerpole® PP180 Silver Plated Wire Contacts, 4 AWG, High Mating Force Also found in: /Powerpole® 180/SB 175

  SKU: 1384

  Compare

  You've reached the 5 product limit. Remove a product to proceed.
• 

  Powerpole® PP75 Standard Housings, Blue

  Powerpole® Connector Standard Housing, Blue , PP75 up to 120 Amps

  SKU: 5916

  Compare

  You've reached the 5 product limit. Remove a product to proceed.
• 

  Powerpole® Pak Connectors Flexible Conduit Clamp & Hardware Pak

  Powerpole® Pak Connectors PP15 to PP45 Flexible Conduit Clamp & Hardware Pak 2-4 Poles

  SKU: 110G10

  Compare

  You've reached the 5 product limit. Remove a product to proceed.
• 

  Powerpole® Connectors PP15 to PP45 Block Lok 4 Pole

  Powerpole® Connectors PP15 to PP45, Block Lok 4 Pole, Black, up to 55 Amps

  SKU: 110G12

  Compare

  You've reached the 5 product limit. Remove a product to proceed.
• 

  Powerpole® 15-45 Retaining Pin 1 Block High

  Keep stacked Powerpole® 15-45 series housings from separating. Retaining pins are inserted in the circular opening between two housings stacked side by side. 1 Block High

  SKU: 110G16

  Compare

  You've reached the 5 product limit. Remove a product to proceed.
• 

  Powerpole® 120 Mounting Clamp 2 or 4 pole

  Powerpole® 120 mounting clamps can be used for fastening a block of Powerpole® 120 series housings to a panel. Connector blocks must be a complete square for the clamps to work properly. Fastening hardware not included.

  SKU: 1464G1

  Compare

  You've reached the 5 product limit. Remove a product to proceed.
• 

  Powerpole® 120 Mounting Clamp

  Powerpole® 120 Mounting Clamp, 2- pole

  SKU: 1464G2

  Compare

  You've reached the 5 product limit. Remove a product to proceed.
• 

  Powerpole® 180 Mounting Clamp 2 pole

  Mounting clamps can be used for fastening a block of Powerpole® 180 series housings to a panel. Connector blocks must be a complete square for the clamps to work properly. Fastening hardware not included.

  SKU: 1465G1

  Compare

  You've reached the 5 product limit. Remove a product to proceed.
• 

  Powerpole® 180 Mounting Clamp 3 pole

  Mounting clamps can be used for fastening a block of Powerpole® 180 series housings to a panel. Connector blocks must be a complete square for the clamps to work properly. Fastening hardware not included.

  SKU: 1465G2

  Compare

  You've reached the 5 product limit. Remove a product to proceed.
• 

  Powerpole® Pak Snap in Receptacle 2-4 Poles

  Mate to plug shells with or without latches, or mate to another panel mount receptacle to create a bulkhead to bulkhead connection. For use with Powerpole® wire or PCB connectors. Order the number of retaining pins for each receptacle as shown below s

  SKU: 1470G1

  Compare

  You've reached the 5 product limit. Remove a product to proceed.
• 

  Powerpole® Pak Snap in Receptacle 2-4 Poles

  Mate to plug shells with or without latches, or mate to another panel mount receptacle to create a bulkhead to bulkhead connection. For use with Powerpole® wire or PCB connectors. Order the number of retaining pins for each receptacle as shown below s

  SKU: 1470G1-BK

  Compare

  You've reached the 5 product limit. Remove a product to proceed.
• 

  Powerpole® Pak Snap in Receptacle 5 to 6 Poles

  Mate to plug shells with or without latches, or mate to another panel mount receptacle to create a bulkhead to bulkhead connection. For use with Powerpole® wire or PCB connectors. Order the number of retaining pins for each receptacle as shown below s

  SKU: 1470G2

  Compare

  You've reached the 5 product limit. Remove a product to proceed.
• 

  Powerpole® Pak Snap in Receptacle 5 to 6 Poles

  Mate to plug shells with or without latches, or mate to another panel mount receptacle to create a bulkhead to bulkhead connection. For use with Powerpole® wire or PCB connectors. Order the number of retaining pins for each receptacle as shown below s

  SKU: 1470G2-BK

  Compare

  You've reached the 5 product limit. Remove a product to proceed.
• 

  Powerpole® Pak Snap in Receptacle 7 to 8 Poles

  Mate to plug shells with or without latches, or mate to another panel mount receptacle to create a bulkhead to bulkhead connection. For use with Powerpole® wire or PCB connectors. Order the number of retaining pins for each receptacle as shown below s

  SKU: 1470G3

  Compare

  You've reached the 5 product limit. Remove a product to proceed.
• 

  Powerpole® Pak Snap in Receptacle 7 to 8 Poles

  Mate to plug shells with or without latches, or mate to another panel mount receptacle to create a bulkhead to bulkhead connection. For use with Powerpole® wire or PCB connectors. Order the number of retaining pins for each receptacle as shown below s

  SKU: 1470G3-BK

  Compare

  You've reached the 5 product limit. Remove a product to proceed.
• 

  Powerpole® Pak Snap in Receptacle 9 to 10 Poles

  Mate to plug shells with or without latches, or mate to another panel mount receptacle to create a bulkhead to bulkhead connection. For use with Powerpole® wire or PCB connectors. Order the number of retaining pins for each receptacle as shown below s

  SKU: 1470g4

  Compare

  You've reached the 5 product limit. Remove a product to proceed.
• 

  Powerpole® Pak Snap in Receptacle 9 to 10 Poles

  Mate to plug shells with or without latches, or mate to another panel mount receptacle to create a bulkhead to bulkhead connection. For use with Powerpole® wire or PCB connectors. Order the number of retaining pins for each receptacle as shown below s

  SKU: 1470g4-bk

  Compare

  You've reached the 5 product limit. Remove a product to proceed.
• 

  Powerpole® 15-45 45A Premate Ground Housings – (for use with ground contacts only) Green

  Green housings are keyed to prevent accidental mating with standard or finger proof Powerpole® housings

  SKU: 1827G1

  Compare

  You've reached the 5 product limit. Remove a product to proceed.