Our Products

Search by product name, keyword, or part number. Or browse the list and narrow results using the filters below.

Filters

SPEC Pak

248 results found
List Grid
  • 3D rendering of a mechanical component with curved base, vertical fins, circular openings, and markings 'T16' and '10 Nm.'

    SPEC Pak® PP180 Holder Half-Bottom

    SPEC Pak® Hig h Power SPEC Pak H02 Holder Half- Bottom
    SKU: 3-5984P2
  • 3D rendering of a cylindrical electrical connector with labels including 'APP' and technical specifications.

    SPEC Pak®Plug Shell

    High Power SPEC Pak® Plug Shell-
    SKU: 3-5986p1
  • 3D rendering of a cylindrical mechanical component with a flange, grooves, slots, and circular openings.

    Mid Power SPEC Pak® Receptacle Holder

    Mid Power SPEC Pak® Receptacle Holder- Holds up to 4 PP75 Housings
    SKU: 3-6014P1
  • 3D rendering of a cylindrical mechanical component with slots and circular holes.

    Mid Power SPEC Pak® Plug Holder

    Mid Power SPEC Pak® Plug Holder- Holds up to 4 PP75 Housings
    SKU: 3-6015P1
  • 3D rendering of a mechanical component with cylindrical shape and engraved text 'APR' and 'SREE PIA.'

    SPEC Pak® Mini 3PL Inline Receptacle

    SPEC Pak® Mini 3PL Inline Receptacle- Male, Holds Pin contacts
    SKU: 3-6029P1
  • Black cylindrical rubber stopper with four holes on one surface.

    Mid Power SPEC Pak® Sealing Grommet (Pm43)

    MP WIRE SEAL, 4 HOLE, WIRE RANGE 7.0-9.0mm (.28″-.35″)
    SKU: B02130P1
  • 3D rendering of a cylindrical object with two circular holes on top.

    Mid Power SPEC Pak® Sealing Grommet (Pm23)

    MP WIRE SEAL, 2 HOLE, WIRE RANGE 7.0-9.0mm (.28″-.35″)
    SKU: B02130P10
  • 3D rendering of a cylindrical object with two circular holes on the top surface.

    Mid Power SPEC Pak® Sealing Grommet (Pm22)

    MP WIRE SEAL, 2 HOLE, WIRE RANGE 6.0-7.2mm (.24″-.28″)
    SKU: B02130P11
  • 3D rendering of a mechanical component resembling a pipe fitting or connector with a cylindrical shape and metallic surface.

    SPEC Pak® 3-Position Mini Wire Sleeve up to 6.5mm- Pack of 50

    SPEC Pak® Wire Sleeve for wires up to 6mm (.256) dia. Use with 3 Position Mini (Original). Not required for IP68 sealing.
    SKU: 2-8703P4-50
  • 3D rendering of a threaded cap with text 'HAND TIGHTEN THEN WRENCH TIGHTEN (14 Nm)' and serial number '1234567'.

    SPEC Pak® Mid Power Seal Nut

    SPEC Pak® Mid Power Seal Nut- Use with Sealing Grommet to Seal cable side of In-line Connectors Plugs and Receptacles
    SKU: 2-8738P1
  • 3D rendering of a mechanical component with a curved base, circular openings, and a rectangular protrusion.

    SPEC Pak® PP180 Holder Half-Top

    SPEC Pak® Hig h Power SPEC Pak H02 Holder Half- Top
    SKU: 3-5984P1
  • 3D rendering of a cylindrical mechanical component with a wider, rounded end and a narrower shaft, featuring a threaded interior and a label on the shaft.

    SPEC Pak® 3-Position Mini Wire Sleeve up to 6.5mm

    SPEC Pak® Wire Sleeve for wires up to 6mm (.256) dia. Use with 3 Position Mini (Original). Not required for IP68 sealing.
    SKU: 2-8703P4
  • Small orange cylindrical plastic component with ridges, possibly a connector or plug.

    SPEC Pak® 3 Position Mini Wire Sealing Grommet Orange, Standard

    SPEC Pak® Wire Sealing Grommets (Required for IP68 Sealing) 24 – 20 – wire OD 0.047 – 0.075 (1.2 mm – 1.9mm) Orange Also found in: /SPEC Pak Mini 3/SPEC Pak Mini 3 PL
    SKU: 114916P1
  • Orange plastic cylindrical component with a flange at the base.

    SPEC Pak® 3 Position Mini Wire Sealing Grommet Orange

    SPEC Pak® Wire Sealing Grommets (Required for IP68 Sealing) 24 – 20 – wire OD 0.047 – 0.075 (1.2 mm – 1.9mm) Orange Also found in: /SPEC Pak Mini 3/SPEC Pak Mini 3 PL
    SKU: 114916P1-50
  • Small yellow plastic cylindrical component with a flared base, possibly a connector or plug.

    SPEC Pak® 3 Position Mini Wire Sealing Grommet Yellow, Standard

    SPEC Pak® Wire Sealing Grommets (Required for IP68 Sealing) 20 – 16 – wire OD 0.073 – 0.090 ( 1.86 mm – 2.4mm) Yellow Also found in: /SPEC Pak Mini 3/SPEC Pak Mini 3 PL
    SKU: 114916P2
  • Small yellow plastic cylindrical component with a flange at the base.

    SPEC Pak® 3 Position Mini Wire Sealing Grommet Yellow

    SPEC Pak® Wire Sealing Grommets (Required for IP68 Sealing) 20 – 16 – wire OD 0.073 – 0.090 ( 1.86 mm – 2.4mm) Yellow Also found in: /SPEC Pak Mini 3/SPEC Pak Mini 3 PL
    SKU: 114916P2-50
  • A small beige cylindrical plastic component with a rounded top and a groove around its base.

    SPEC Pak® 3 Position Mini Wire Sealing Grommet Tan, Standard

    SPEC Pak® Wire Sealing Grommets (Required for IP68 Sealing) 16 – 14 – wire OD 0.100 – 0.130 ( 2.5 mm – 3.2mm) Tan Also found in: /SPEC Pak Mini 3/SPEC Pak Mini 3 PL
    SKU: 114916P3
  • Small beige cylindrical plastic component with flared base and central hole.

    SPEC Pak® 3 Position Mini Wire Sealing Grommet Tan

    SPEC Pak® Wire Sealing Grommets (Required for IP68 Sealing) 16 – 14 – wire OD 0.100 – 0.130 ( 2.5 mm – 3.2mm) Tan Also found in: /SPEC Pak Mini 3/SPEC Pak Mini 3 PL
    SKU: 114916P3-50